A quick look into what steps I completed to limit ciphers used on a reverse proxy services in Bluecoat. Proxy_Host#config t Proxy_Host#(config) Proxy_Host#(config)proxy-services Proxy_Host#(config proxy-services) Proxy_Host#(config proxy-services)edit PROXY-OWA Proxy_Host#(config PROXY-OWA)attribute…
BPDU Filter by its name filters out any BPDUs coming in and out of an interface. Why would you want this you may ask. This would be useful when you have a layer 2 network, which two vendors manage two sides of a layer 2 network as figure 1 shows. So you want spanning-tree to be managed separately. Another good reason would be to simply not want a port to participate in spanning tree. Of course this would have major drawback. It allows layer 2 loops to occur without detection from Spanning Tree.
A simple way of to find out, what object-groups an ip address belongs to on a cisco ASA. ciscoasa#sh run object-group | in ^object-group|<ip address>
- Confirm that the cellular interface card has been installed with the relevant 3G simcard.
- Unlock the 3g simcard with the correct pin number. In below command 0000 is your pin number.
- Create the cellular gsm profile. The username and password is what you authenticate too. In some instances it may be a service that the ISP provides or you may have your own service. Such as a RADIUS service.
- Create the chat script which will be used to establish connection with the ISP. “ATDT*98*1#” is what is used to connect to the ISP. You will need to contact your ISP to determine what code they use to allow connections. Read More Setting Up a Cisco 3G Backup Solution
cellular 0/0/0 gsm sim unlock 0000
cellular 0/0/0 gsm profile create 1 wl.domain.com chap email@example.com password ipv4